Our Gun Care Products Include:

KG-1 Carbon Remover
KG-1 was initially formulated for exclusive use by a military group to remove carbon buildup from their weapons. Unlike other Cleaners, KG-1 contains no ammonia and is pH neutral. KG-1 is ideal for removing carbon from black powder rifles.

KG-2 Bore Restore
Originally developed to maintain the bore integrity of sniper rifles, KG-2 is being introduced to the public to provide shooters with a product that will actually improve the condition of the bore while cleaning it. Like KG-1, KG-2 contains no ammonia and uses a mechanical method to remove the worst of copper, lead and powder residue. KG-2 can be used when shooting numerous rounds in between cleanings or as a bore conditioner for those weapons needing extra care. KG-2 is an ideal product for fire lapping.

See Fire Lapping Application
See KG-2 Test Results

KG-3 Cleaning Solvent and Degreaser
KG-3 is a non-chlorinated ozone safe formula used to remove the residue loosened by KG-1 and KG-2 and is also used for cleaning and decreasing parts. KG-3 contains a special formulation of fast drying, water-displacing solvents which will rapidly cut through oil and grease, leaving no residue.

KG-4 Gun Oil
KG-4 is one of the few lubricants that meets requirements set forth in Mil-L-63460D. It is a blend of the finest lubricants available, and contains no synthetics. With very low surface tension, KG-4 exhibits excellent lubrication and provides outstanding corrosion protection. KG-4 has the added property of keeping current firing residue in suspension which allows for easier cleaning. KG-4 has been field tested for endurance using 50 caliber machine guns. Initially the 50s were experiencing stoppages at 750 to 1000 rounds. After using KG-4 (CLP2) the guns were fired and stopped at 6000 rounds due to heat and to clean the weapons.

KG-5 Trigger Lube
KG-5 is a blend of our Gun oil, thinned and sub-micron PTFE. The PTFE is ground in a proprietary carrier and the added to the thinned oil base. This blend has produced an excellent lubricant especially for triggers. KG-5 provides excellent lubrication, penetration and corrosion protection. KG-5 will keep trigger pulls even and smooth.

KG-6 Moly Armorkote Bore Prep
Based on past and recent test resutls KG-6 was developed to offer the advantages of Moly to both reloaders and those who buy factory ammo. KG-6 is unlike the greases you are used to seeing. Formulated with Molybdenum Disulfide suspended in a fine oil, our finished product is a superior lubricant, does not need to be shaken and has an affinity for metal. KG-6 is much easier to use than the grease products presently on the market. KG-6 will embed a very thin film of Moly onto the bore that will aid in less bore fouling. Most shooters today are reporting 50 to 100 round strings without cleaning.

KG-7 Moly Armorkote Powder
KG Products is now offering for sale the same Molybdenum Disulfide used in our Bullet Kote, Gear Kote, and Gun Kote. This is simply the best quality Molybdenum available on the market today. There are only three grades of Molybdenum Disulfide: Technical Grade, Technical Fine and Super Fine or what used to be known as Suspension Grade. KG products uses only the finest Suspension Grade or Technical Fine grades available. We have to! Our coatings are used by some of the best racers and gunsmiths around the world! Both Technical Fine and Super Fine powders work in all tumbler applications.

KG-8 Micro PTFE Dri Lube
THE DRY PTFE - NO MESS LUBRICANT. PTFE Dry Lube is new technology, incorporating a highly effective P.T.F.E. “PTFE.” This new technology grinds the PTFE Molecule to half of its molecular weight creating a low surface tension lube. The result produces a multi purpose lubricant which greatly reduces friction and wear more effectively then the normal PTFE. Use PTFE Dry Lube where a dry no-mess lubricant is required, i.e. triggers, slides, etc. It is especially useful for conceal and carry weapons where oil can be a problem.

KG-9 Leather Kote
By incorporating our new micro technology PTFE, and a combination of fine silicone lubricants and then adding the ability to suspend these lubricants into a paste, KG Products has developed one of the finest Leather Lubricants on the market today. Friction Coefficient of KG-9 once burnished into the leather will dramatically improve and will reduce the leather wear.

KG-10 Micro Moly Dry Lube
THE MOLY NO MESS LUBRICANT KG-10 Moly Dry film Lubricant is a highly effective MOS2 multi-purpose lubricant which greatly reduces friction and wear. KG-10 goes on wet, penitrates into the metal, drys leaving a pure Moly dry film that will protect and lubricate without artracting dirt or dust.Use KG-10 Dry Lube where a dry no-mess lubricant is required i.e. Triggers, slides, etc. Shake well before using. Apply KG-10 to areas you want lubricated. Allow to dry. You can ecelirate the drying process by blowing on the film. Repeat process if you want to build up lubicant. Reassemle parts. Use KG-10 Dry Lube where a dry no-mess lubricant is required i.e. Triggers, slides, etc.

Gun Cleaning Bench Mats
Manufactured for many OEM companies such as Midway, Precision Reloading, Brownells, Sinclair and others. KG is offering the GunMat direct to the public with our KG Logo. This mat is very useful and practical and solves the problem of trying to find something to clean your guns on besides the bathroom towels!

KG-12
KG-12 was developed to clean the copper fouling from large bore military weapons. KG-12 will provide shooters with a product which will remove the toughest of copper fouling without harming any other metal. Unlike other etching, ammonia based cleaners, KG-12 will not hurt the metal of the bore. There is no need to "neutralize" KG-12 like you do with other Ammonia based products and no need to "get it out quick" like ammonia based enchants. KG-12 contains no ammonia . KG-12 is water based . KG-12 will remove the worst of copper fouling, and it will do it fast. KG-12 contains no synthetics. KG-12 was field tested on howitzers (One Million Dollars each) and other large bore guns with outstanding results.When used in conjunction with KG-2, KG-3 and KG-4 you will find no better cleaning system on the market. In general you can call KG-12 the Million Dollar Gun Cleaner!
Click here to see Test Results for KG-12

1200 Series Air Cure Stock Kote [Buy It]
KG’s New ONE PART Air Cured coatings are a single component water based modified, proprietary  polyurethane resin system.  Stock Kote is a hard coating with a cure time of only 80 minutes at an ambient temperature of 70 degrees F.   Read Data Sheet

1600 Gun Kote Extreme PTFE [Buy It]
The 1600 Series, a high load P.T.F.E. formulation, is a hard thin film protective coating developed to provide excellent dry film properties, corrosion and chemical resistance. It is very well suited in areas such as aerospace, automotive, firearms, marine and the oil/chemical industries.

2300 Series Gun Kote [Buy It]
The 2300 is the original Gun Kote Formula. KG 2300 was among the first thin film coatings to be used by the military and is the product that started KG's long reputation of quality coatings. The 2300 comes in off black only.

2400 Series Gun Kote [Buy It]
The 2400 Series, our premier coating, is a thin hard coating that will give excellent abrasion resistance, exceptional heat dissipation and corrosion protection.

3400 Series Ceramic Fill [Buy It]
3400 Series Ceramic Fill Bake On: KG's 3400 CF coatings are cost effective ONE PART coatings,which exhibit good heat dissipation, hardness, good color stability, excellent chemical resistance, impact resistance, abrasion resistance, high heat requirements, and good corrosion resistance. The 3400 coatings show the type of durability usually found only in two part systems.

KG-100 Moly Armorkote Tumbler Kit [Buy It]
The KG-100 Kit is for shooters who like dry Moly tumbler methods for coating bullets. The advantage of the Moly ArmorKote Kit over other kits sold on the market is you will not need to ruin a tumbler bowl or dedicate one just for tumbling. KG-100 uses no steel balls or waxes that can cause caking or buildup in the bore. KG-100 is a system that simply contains the bullets, keeps them tight together to minimize impact and thus distortion and you can do it in your existing tumbler.

6400 Series Pure Ceramic C-Kote [Buy It]
6400 Series Pure Ceramic C-Kote is a true water reducible ceramic coating developed for the coating of exhaust manifolds, piston domes and other applications where high heat management and wear of abrasion resistance is required.