|
|
Please remember that monitors may not display the colors accurately. The metal, preparation, application and baking times/temperatures will also have an effect on the color. We must stress that the colors shown below are for GUIDANCE ONLY and that the actual color may differ from those shown.
Use this grayscale chart to gauge the color accuracy of your monitor. If they do not look gray or if you cannot see the steps between percentages, please adjust your monitor.
1200 Series Stock Kote: KG's new single part air cured coating is formulated from our proprietary single component water based polyurethane resin system. The 1200 Series coatings will produce a hard, but flexible coating with a cure time of only 80 minutes at an ambient temperature of 70 degrees F. The 1200 Series was formulated to address the need for a low VOC, ambient cure system to replace two part catalyzed systems which may need well over 500 hours to cure. Most impressive, and unlike most two part systems, the 1200 Series will provide excellent chemical resistance to even Ketone solvents. The 1200 Series is an ideal coating for all plastics, rubber or any substrate that cannot be subjected to high heat. The 1200 Series will be useful in an array of different industries including, but not limited to, motorcycles, firearms, watercraft, automotive and play ground equipment.
NOTICE: Due to product demand, the 1200 Series Air cure will now be available in Flat finishes only, with exception to the Satin Black. If you wish to have a satin finish with any other color, the 1209 Satin Clear will be available. We appologize for any inconvenience this may cause.
4000 K-Phos PretreatmentK-Phos is a major breakthrough in the field of corrosion protection. It was...
Price: $12.00
|
KG-3 Solvent and DegreaserKG-3 is a non-chlorinated ozone safe formula used to remove the residue...
Price: $9.85
|
KG-410 Light Weight OilDeveloped specifically for the Ventura County Sheriffs Department,...
Price: $10.95
|